Trity Environ Solutions is a trusted STP and ETP plant manufacturer in Sonipat, building effluent systems for the textile, food, and engineering units of Kundli, Barhi, and Rai, and sewage plants for housing and hospitals. With the Tribunal examining Drain No. 6 and the Barhi common plants, it designs plants that hold discharge inside limits, with pan India installation support behind every project. Whether you need a sewage treatment plant manufacturer in Sonipat or an effluent treatment plant manufacturer in Sonipat, Trity Environ Solutions builds both in-house, from design to commissioning.
In November 2023 the National Green Tribunal was told by a joint committee that about 31.48 MLD of untreated sewage entered Drain No. 6 from 27 points, mainly from the municipal corporation, and compensation of Rs 15 lakh each was recommended for a non functional 7 MLD Ganaur plant and the non functional Barhi common effluent plant. Drain No. 6 overflows into Drain No. 8, which joins the Yamuna, and the applicant's claim that Delhi's water plants were affected is an allegation. In January 2025 an inspection of 157 units found 94 non compliant, including 69 of 74 textile units, and the two Barhi common plants of 16 MLD and 10 MLD were running at 85 and 40 per cent.
In April 2025 the board's fines on the industrial development corporation exceeded Rs 2.5 crore, with common plant samples reportedly failing monthly for about three years. A 2026 CAG audit found 22.85 per cent of the district's sewage untreated and a 25 MLD plant at Kakroi running at about a third of capacity because of a faulty sewer line. Reported counts vary, so confirm current figures. Trity Environ Solutions builds effluent treatment plants for textile and process units and sewage treatment plants for Sonipat's housing and hospitals, designed against your real load and HSPCB consent conditions.
Request a free site assessment for your Sonipat site and the engineering team will confirm the right configuration.
For the wider picture across the state, see our STP and ETP plant manufacturer in Haryana page.
Colour, COD, and TDS handling designed for textile and washing effluent.
Sampling points and a dated log of treated water quality, ready for joint committee inspections.
Polished water for cooling, flushing, and gardens, which cuts fresh water demand and tanker use.
Modular MBBR and MBR layouts for hospitals, hotels, and housing in Sonipat where land is limited.
Installation, operator training, and AMC response across Sonipat and nearby industrial areas.
When shared plants fail, units that send them effluent share the consequence. On site pre treatment with a dated log is the strongest position. A wastewater recycling system can reduce what a unit discharges.
Dosing pumps drift, blowers wear, and sludge handling slips when nobody watches them. Trity Environ Solutions supports every Sonipat installation with operator training, performance checks, and an Annual Maintenance Contract, so treated water stays within limits through peak load and seasonal swings. Talk to our team about AMC coverage for your facility.
Trity Environ Solutions also has state level pages for a sewage treatment plant manufacturer in Haryana covering housing, hospitals, and hotels, and an effluent treatment plant manufacturer in Haryana covering industrial effluent.
Our textile dyeing effluent treatment plant removes colour, COD, and dissolved solids from textile and washing units.
Our food and beverage effluent treatment plant handles the organic load from food, dairy, and beverage units.
Our oil water separator separates free oil from process and wash water before further treatment.
Our wastewater recycling system polishes treated effluent through ultrafiltration and RO so it can return to the process.
Our MBBR sewage treatment plant is a compact, low maintenance option for housing and hospital projects.
Flow measurement and sampling establish your actual load, including colour, COD, TDS, and domestic load.
Technology and layout are fixed against HSPCB consent conditions, available footprint, and reuse targets.
Components are manufactured under ISO 9001:2015 quality controls, then installed and commissioned by Trity's site team.
The plant is tested against consent limits, operators are trained, and ongoing AMC support keeps performance consistent afterward.
The Haryana State Pollution Control Board (HSPCB) issues consent to establish and consent to operate, alongside CPCB guidelines and National Green Tribunal directions.
Yes. Each plant is designed from your own effluent analysis, with colour, COD, and TDS handling sized for your process.
Common plants have failed tests and drawn penalties, so pre treatment on site with a dated record is the safer position.
Large residential, commercial, and healthcare projects generally need an STP as part of building approval and HSPCB consent conditions. Thresholds vary by project size and category, so confirm yours with the local authority.
Prefabricated modular plants typically commission within 45 to 90 days, while civil-based plants for larger capacities take 3 to 6 months from design approval to handover.
Yes. We audit existing plants, retrofit capacity or technology, and take them under an annual maintenance contract.
Look for in-house manufacturing, experience with HSPCB consent requirements, a design based on your own wastewater analysis, and a clear maintenance offering after commissioning. Trity Environ Solutions builds its plants under ISO 9001:2015 quality controls and supports every installation with operator training and an annual maintenance contract.
Our engineering team can help design the right system for your capacity, industry, and compliance requirements.