Trity Environ Solutions is a trusted STP and ETP plant manufacturer in Yamunanagar, building effluent systems for the plywood, paper, steel, and rolling units of Yamunanagar and Jagadhri, and sewage plants for hotels, hospitals, and housing. With notices and closure orders issued here, it designs plants that hold discharge inside limits, with pan India installation support behind every project. Whether you need a sewage treatment plant manufacturer in Yamunanagar or an effluent treatment plant manufacturer in Yamunanagar, Trity Environ Solutions builds both in-house, from design to commissioning.
On 27 May 2025 the National Green Tribunal passed a judgment on plywood factories in the district, covering 28 units mostly in Damla village, with the applicant claiming about 1,000 plywood factories. It noted a pollution index of 78.3 for plywood and directed the board to sample borewell and groundwater and inspect 15 units for resin plants. In January 2025 the board issued notices to 220 units, including metal, food and beverage units, hospitals, and hotels, for allegedly discharging untreated effluent into a drain leading to the Yamuna, and many ETPs were reportedly non operational.
Twelve Jagadhri units, among them steel and metal product and rolling mills, received closure notices in January 2025 after a CPCB inspection in October 2024. A 47 MLD plant at Jammu Colony treats the city's sewage, and in 2025 the Deputy Commissioner directed expansion. A 2026 CAG audit found 45.68 per cent of sewage untreated. We found no paper mill specific effluent figure. Trity Environ Solutions builds effluent treatment plants for plywood, metal, and food units and sewage treatment plants for Yamunanagar's hotels, hospitals, and housing, designed against your real load and HSPCB consent conditions.
Request a free site assessment for your Yamunanagar site and the engineering team will confirm the right configuration.
For the wider picture across the state, see our STP and ETP plant manufacturer in Haryana page.
Treatment for resin and glue bearing wastewater and groundwater safe handling.
An ETP that exists but is not run is the common failure, so our plants come with operator training and AMC.
Polished water for cooling, flushing, and gardens, which cuts fresh water demand and tanker use.
Modular MBBR and MBR layouts for hospitals, hotels, and housing in Yamunanagar where land is limited.
Installation, operator training, and AMC response across Yamunanagar and nearby industrial areas.
The 2025 notices followed reports that many ETPs were not operational. A running plant with a flow meter and a dated log is the strongest position. A wastewater recycling system can reduce what a unit discharges.
Dosing pumps drift, blowers wear, and sludge handling slips when nobody watches them. Trity Environ Solutions supports every Yamunanagar installation with operator training, performance checks, and an Annual Maintenance Contract, so treated water stays within limits through peak load and seasonal swings. Talk to our team about AMC coverage for your facility.
Trity Environ Solutions also has state level pages for a sewage treatment plant manufacturer in Haryana covering housing, hospitals, and hotels, and an effluent treatment plant manufacturer in Haryana covering industrial effluent.
Our physico-chemical effluent treatment plant removes suspended solids and metals through pH correction, coagulation, and clarification.
Our chemical industry effluent treatment plant handles oil, scale, and difficult process water.
Our oil water separator separates free oil from process and wash water before further treatment.
Our wastewater recycling system polishes treated effluent through ultrafiltration and RO so it can return to the process.
Our MBR sewage treatment plant delivers high quality, low odour treated water in very little space, suited to reuse.
Flow measurement and sampling establish your actual load, including solids, oil, COD, and domestic load.
Technology and layout are fixed against HSPCB consent conditions, available footprint, and reuse targets.
Components are manufactured under ISO 9001:2015 quality controls, then installed and commissioned by Trity's site team.
The plant is tested against consent limits, operators are trained, and ongoing AMC support keeps performance consistent afterward.
The Haryana State Pollution Control Board (HSPCB) issues consent to establish and consent to operate, alongside CPCB guidelines and National Green Tribunal directions.
Yes. Each plant is designed from your own effluent analysis, with solids, resin, oil, and metals handling sized for your process.
A 47 MLD plant operates at Jammu Colony and expansion was directed in 2025, but coverage is partial, so confirm availability for your site.
Large residential, commercial, and healthcare projects generally need an STP as part of building approval and HSPCB consent conditions. Thresholds vary by project size and category, so confirm yours with the local authority.
Prefabricated modular plants typically commission within 45 to 90 days, while civil-based plants for larger capacities take 3 to 6 months from design approval to handover.
Yes. We audit existing plants, retrofit capacity or technology, and take them under an annual maintenance contract.
Look for in-house manufacturing, experience with HSPCB consent requirements, a design based on your own wastewater analysis, and a clear maintenance offering after commissioning. Trity Environ Solutions builds its plants under ISO 9001:2015 quality controls and supports every installation with operator training and an annual maintenance contract.
Our engineering team can help design the right system for your capacity, industry, and compliance requirements.