Trity Environ Solutions is a trusted STP and ETP plant manufacturer in Silchar, building wastewater systems for housing, hospitals, hotels, and small industry in the Barak valley. With the Barak river stretch downstream of the city on the state's rejuvenation list, it designs plants that hold treated water inside limits and make it reusable, with pan India installation support behind every project. Whether you need a sewage treatment plant manufacturer in Silchar or an effluent treatment plant manufacturer in Silchar, Trity Environ Solutions builds both in-house, from design to commissioning.
The Pollution Control Board, Assam (PCBA) River Rejuvenation Committee action plan for the Barak river names a polluted stretch of about 11 km downstream of Annapurna Ghat in Silchar. It put Silchar's sewage generation at about 76,082 KLD, roughly 76 MLD, against existing treatment capacity of nil, and proposed one sewage treatment plant of that size with a budget of Rs 93 crore. It recorded that the river's BOD reading was highest at 5.5 mg/L in December 2018, linked the exceedances to flooding and drainage of untreated sewage, and listed Rangir Khal and Singir Khal among the city's drains. The plan carried a two year timeline from 2019, so confirm what has since been built.
A 2021 state report to the National Green Tribunal also listed Silchar among five cities for which the state sewerage board had directed sewage treatment plants and prepared detailed project reports. Until those plants run, a project in Silchar has no assured public connection. The action plan also records that zero liquid discharge has been directed for major polluting units. Trity Environ Solutions builds sewage treatment plants for Silchar's housing, hospitals, and hotels, and effluent treatment plants for small industry in the valley, designed against your real load and PCBA consent conditions.
Request a free site assessment for your Silchar site and the engineering team will confirm the right configuration.
For the wider picture across the state, see our STP and ETP plant manufacturer in Assam page.
Stand alone plants for projects that cannot rely on a public plant that has yet to be built.
Equalisation and buffer capacity sized for the surges that flooding and heavy rain bring.
Polished water for flushing, gardens, and cooling, which cuts fresh water demand and tanker use.
ETPs sized for small units that need their own treatment and cannot share a plant.
Installation, operator training, and AMC response across Silchar and the Barak valley.
With existing public treatment recorded at nil, the river receives whatever sites do not treat. A plant with a flow meter, sampling points, and a dated log of treated water quality is the strongest position at inspection. A grey water treatment plant can separate lighter wastewater so more of it is reused.
Dosing pumps drift, blowers wear, and sludge handling slips when nobody watches them. Trity Environ Solutions supports every Silchar installation with operator training, performance checks, and an Annual Maintenance Contract, so treated water stays within limits through monsoon and production swings. Talk to our team about AMC coverage for your facility.
Trity Environ Solutions also has state level pages for a sewage treatment plant manufacturer in Assam covering housing, hospitals, and hotels, and an effluent treatment plant manufacturer in Assam covering industrial effluent.
Our MBBR sewage treatment plant fits basement and podium layouts and holds treated quality across peak swings.
Our MBR sewage treatment plant delivers high quality, low odour treated water in very little space, suited to reuse for cooling and flushing.
Our packaged containerized sewage treatment plant is a factory built, quick to commission option for smaller flows.
Our physico-chemical effluent treatment plant removes metals and suspended solids through pH correction, coagulation, and clarification.
Our wastewater recycling system polishes treated effluent through ultrafiltration and RO so it can return to the process.
Flow measurement and sampling establish your actual load, including flow pattern, occupancy, and peak load.
Technology and layout are fixed against PCBA consent conditions, available footprint, and reuse targets.
Components are manufactured under ISO 9001:2015 quality controls, then installed and commissioned by Trity's site team.
The plant is tested against consent limits, operators are trained, and ongoing AMC support keeps performance consistent afterward.
The Pollution Control Board, Assam (PCBA) issues consent to establish and consent to operate, alongside CPCB guidelines and National Green Tribunal directions.
The state's own plan recorded existing treatment capacity as nil, with a plant proposed, so confirm the current position with the local authority and plan for an on-site plant if a connection is not assured.
Yes. Each plant is designed from your own effluent analysis, whether the load is organic, oily, or chemical.
Large residential, commercial, and healthcare projects generally need an STP as part of building approval and PCBA consent conditions. Thresholds vary by project size and category, so confirm yours with the local authority.
Prefabricated modular plants typically commission within 45 to 90 days, while civil-based plants for larger capacities take 3 to 6 months from design approval to handover.
Yes. We audit existing plants, retrofit capacity or technology, and take them under an annual maintenance contract.
Look for in-house manufacturing, experience with PCBA consent requirements, a design based on your own wastewater analysis, and a clear maintenance offering after commissioning. Trity Environ Solutions builds its plants under ISO 9001:2015 quality controls and supports every installation with operator training and an annual maintenance contract.
Our engineering team can help design the right system for your capacity, industry, and compliance requirements.