Trity Environ Solutions is a trusted STP and ETP plant manufacturer in Cuttack, building wastewater systems for housing, hospitals, hotels, and small industry between the Mahanadi and the Kathajodi. With the High Court following the city's sewage plans, it designs plants that hold treated water inside limits and make it reusable, with pan India installation support behind every project. Whether you need a sewage treatment plant manufacturer in Cuttack or an effluent treatment plant manufacturer in Cuttack, Trity Environ Solutions builds both in-house, from design to commissioning.
In March and April 2022 the Orissa High Court heard the Cuttack Municipal Corporation say sewage into the Kathajodi would be diverted by an underground line to the Matagajpur plant. The court asked the water board for the status of a 16 MLD plant there, and the main drain was reported stalled at a railway overbridge, with money deposited with the Railways since 2014. The board had raised concerns about water quality at the discharge point. A 2018 NIUA based report said Cuttack generated about 92 MLD, all discharged untreated, and that the 33 MLD Madgajpur plant had long been non operational, with a larger plant under development.
Those are dated and partly reported rather than current, so confirm today's position with the municipal corporation. The Kathajodi and Mahanadi are on the 19 stretch polluted list of the 2018 CPCB assessment. A separate 2021 Tribunal matter on riverbed construction was about encroachment, not effluent, and its 421 acre claim is the petitioner's allegation. For a private site, on site treatment is the dependable route. Trity Environ Solutions builds sewage treatment plants for Cuttack's housing, hospitals, and hotels, and effluent treatment plants for small industry, designed against your real load and OSPCB consent conditions.
Request a free site assessment for your Cuttack site and the engineering team will confirm the right configuration.
For the wider picture across the state, see our STP and ETP plant manufacturer in Odisha page.
Plants sized so treated water leaves your site inside limits, not into a drain that ends at the river.
Sampling points and a dated log of treated water quality for a river under court attention.
Polished water for cooling, flushing, and gardens, which cuts fresh water demand and tanker use.
Modular MBBR and MBR layouts for hospitals, hotels, and housing in Cuttack where land is limited.
Installation, operator training, and AMC response across Cuttack and nearby industrial areas.
A planned diversion has been stalled for years, so relying on a future connection is a risk. A plant of your own with a flow meter and a dated log is the strongest position. A grey water treatment plant can separate lighter wastewater so more of it is reused.
Dosing pumps drift, blowers wear, and sludge handling slips when nobody watches them. Trity Environ Solutions supports every Cuttack installation with operator training, performance checks, and an Annual Maintenance Contract, so treated water stays within limits through peak load and seasonal swings. Talk to our team about AMC coverage for your facility.
Trity Environ Solutions also has state level pages for a sewage treatment plant manufacturer in Odisha covering housing, hospitals, and hotels, and an effluent treatment plant manufacturer in Odisha covering industrial effluent.
Our MBBR sewage treatment plant fits basement and podium layouts and holds treated quality across peak swings.
Our MBR sewage treatment plant delivers high quality, low odour treated water in very little space, suited to reuse for cooling and flushing.
Our packaged containerized sewage treatment plant is a factory built, quick to commission option for smaller flows and colonies.
Our food and beverage effluent treatment plant handles the organic load from food, dairy, and packaged food units.
Our wastewater recycling system polishes treated effluent through ultrafiltration and RO so it can return to the process.
Flow measurement and sampling establish your actual load, including flow pattern, occupancy, and peak load.
Technology and layout are fixed against OSPCB consent conditions, available footprint, and reuse targets.
Components are manufactured under ISO 9001:2015 quality controls, then installed and commissioned by Trity's site team.
The plant is tested against consent limits, operators are trained, and ongoing AMC support keeps performance consistent afterward.
The State Pollution Control Board, Odisha (OSPCB) issues consent to establish and consent to operate, alongside CPCB guidelines and National Green Tribunal directions.
Public plans have been delayed in court hearings, so confirm the current position with the municipal corporation and plan for on-site treatment if a connection is not assured.
Yes. Each plant is designed from your own effluent analysis, with biological stages sized for your load.
Large residential, commercial, and healthcare projects generally need an STP as part of building approval and OSPCB consent conditions. Thresholds vary by project size and category, so confirm yours with the local authority.
Prefabricated modular plants typically commission within 45 to 90 days, while civil-based plants for larger capacities take 3 to 6 months from design approval to handover.
Yes. We audit existing plants, retrofit capacity or technology, and take them under an annual maintenance contract.
Look for in-house manufacturing, experience with OSPCB consent requirements, a design based on your own wastewater analysis, and a clear maintenance offering after commissioning. Trity Environ Solutions builds its plants under ISO 9001:2015 quality controls and supports every installation with operator training and an annual maintenance contract.
Our engineering team can help design the right system for your capacity, industry, and compliance requirements.